What do the buttons and indicators on the control panel of my revolving door mean?

 BUTTON/INDICATOR 

  DESCRIPTION

 Key Switch

The key switch has three positions for setting the door's operation mode:

• 0: The machine is turned off.

• 1: The machine is in normal operation mode

• 2: The machine is in night mode

 Status Indicator

The status indicator displays the current active error code. The six LEDs light up in a unique pattern for each error code. If multiple error codes are active, the status indicator cycles through them sequentially.

Refer to this guide for a list of error codes and their meanings. 

Each button on the TouchM control panel is equipped with an indicator light, which displays the current status of the button.

  Disturbance Button

Pressing the disturbance button immediately locks the door set using the TL360 brake. When the door set is locked, the indicator light will turn on.

Disturbance Button (with Automatic Night Doors)

Pressing the disturbance button immediately locks the door set using the TL360 brake. When the door set is locked, the indicator light will illuminate.

Optionally, the night doors can be closed and locked for added security. Once the night doors are closed and locked, the system waits for 30 seconds before automatically unlocking the door set.

Exit Button

The exit button allows users to leave the building when the door is in night mode. Pressing the button rotates the door set by two segments. If you are inside a closed segment when the door set stops, the ceiling sensor will trigger the door to rotate one additional segment to ensure a clear exit.

Press the automatic night doors button while the machine is in regular operating mode to activate Winter Mode.

In Night Mode, the night doors close automatically. If the door is equipped with a TL360N system, you can open and close the night doors using the automatic night doors button.

The indicator light shows whether the automatic night doors are open or closed.

Idle Speed Button

Pressing the idle speed button activates idle speed mode. In this mode, the door set rotates continuously at a low speed. When a motion sensor is triggered, the door set transitions to regular operation speed.

Pressing the autofolding button folds one door wing outward, creating an unobstructed passage. To deactivate the auto folding mode, press the button twice within 2 seconds.